GMG pouch cell reaches 26 Wh/kg in six-minute charge

GMG logo
GMG's graphene aluminum-ion pouch cells delivered 26 Wh/kg with a six-minute charge and 58 Wh/kg with a one-hour charge in third-party testing. Customer testing is planned for 2026 and small commercial production for 2027.

Share This Post

Graphene Manufacturing Group Ltd. (GMG) announced on December 15, 2025, that its graphene aluminum-ion pouch cells achieved energy densities of 58 Wh/kg when charged in one hour and 26 Wh/kg when charged in six minutes. The technology is being developed with the University of Queensland under a joint development agreement with Rio Tinto and with support from the Battery Innovation Center of Indiana (BIC).

According to third-party testing by BIC, the cells reached 62% capacity in 3.2 minutes during six-minute fast charging. They operated at a nominal voltage of approximately 3.0 V and maintained performance over hundreds of cycles at that charging rate without the significant degradation typically observed in lithium- and sodium-ion cells under comparable conditions.

GMG said it has developed a chloride-free, noncorrosive hybrid electrolyte, along with new cathode and anode technologies. Both electrodes use aluminum foil substrates rather than the copper commonly used in lithium-ion and sodium-ion batteries. The company has submitted an additional patent application covering the developments.

The battery remains at Battery Technology Readiness Level 4, with GMG continuing laboratory work to optimize pouch-cell electrochemical performance. The company ultimately targets energy densities above 150 Wh/kg with a one-hour charge and above 75 Wh/kg with a six-minute charge. Other development targets include charging in under six minutes, a cycle life of 10,000 cycles and operation without a thermal management system.

GMG plans to send sample cells to partners for testing in early 2026. Its roadmap calls for customer testing during 2026 and small-scale commercial production with partners, including BIC, in 2027. The company is initially targeting applications requiring high power and rapid charging, including heavy mobile equipment, commercial vehicles, stationary storage and industrial systems.

G+AI pouch-cell performance update

GMG pouch cell reaches 26 Wh/kg in six-minute charge

BIC testing shows stable fast charging, while GMG’s chloride-free, noncorrosive electrolyte and aluminium substrates point to lower production costs than LTO.

26 Wh/kgSix-minute energy densityCurrent pouch-cell result from third-party BIC testing.
Energy density
1-hour end goalManagement’s eventual targetover 150 Wh/kg
1-hour key targetAfter 1 hour of charging> 100 Wh/kg
6-minute end goalManagement’s eventual targetover 75 Wh/kg
Current 1-hour chargeProduced by GMG and BIC58 Wh/kg
Current 6-minute chargeProduced by GMG and BIC26 Wh/kg
Fast-charge capacity62% capacityAchieved during 6-minute fast charging
Milestone time3.2 minutesTime taken to reach the reported capacity milestone
Nominal voltage3.0 VoltsApproximately, for the tested batteries
Cycle-life target10,000 cyclesKey target specification requirement

Targets remain management expectations; current figures are third-party BIC test results, not commercial-cell specifications.

Commercialisation remains aheadBTRL remains at Level 4; GMG anticipates BTRL 7 and 8, customer testing in 2026 and small commercial production in 2027.
GMG pouch cell reaches 26 Wh/kg in six-minute charge · BatteryTech Network

Source: Graphene Manufacturing Group

Subscribe to Newsletter

Share This Post

Logo_Battery-Tech-Network_Thumbnail

Subscribe To Our
Weekly Newsletter​

Logo_Battery-Tech-Network_Thumbnail

Contact Form